633 3 Ave SW Unit 1207

Calgary, AB, T2P 2Y5

8am - 8pm

Office work all day


Call Us

Washer Not Spinning

Here, you know how to help your washer run better.

Broken Washer? Need a Washer Tech Now?

Book a qualified, dryer professionals.

Call us
Washing machine not spinning?

How to fix washing machine not spinning?

How to fix washing machine not spinning?

The frustration of a washing machine that won't spin and drain can be extreme. The disruption of your laundry routine, the wet clothes, or possible water build-up can all be caused by a washer that is not working as it should. But do not worry! Our comprehensive guide can help you diagnose these common washer issues and get your laundry back on schedule.

Diagnosing the Issue:

Lid Switch Malfunction: Many washers have a lid switch that prevents the machine from spinning or draining if the lid is open. Check if the lid switch is damaged or misaligned.

Drainage Obstruction: A clogged or partially blocked drain hose or pump filter can hinder proper drainage. Look for debris, lint, or foreign objects that might be causing the blockage.

Faulty Drive Belt: If the drive belt is worn, damaged, or broken, the washer won't be able to spin. Examine the belt for signs of wear and tear.

Motor or Motor Control Board Issues: A malfunctioning motor or motor control board can disrupt the spinning cycle. Listen for unusual noises or vibrations during the operation.

Water Pump Problems: A defective water pump can hinder drainage. Check for leaks around the pump and ensure it's working correctly.

Imbalanced Load: An unevenly distributed load inside the drum can trigger the washer's imbalance detection system, preventing it from spinning.

Washer Troubleshooting Steps:

Check the Lid Switch: Close the lid and listen for a clicking sound. If you don't hear it, the lid switch might need replacement.

Clear Drainage Pathways: Disconnect the washer from power and water sources, then inspect the drain hose and pump filter for blockages. Remove any debris and clean thoroughly.

Inspect the Drive Belt: Access the back of the washer and examine the drive belt. If it's damaged, consult your washer's manual for replacing it.

Test the Motor: Run a cycle with an empty drum and listen for unusual noises. If the motor sounds strained or exhibits irregular behavior, it might require professional attention.

Examine the Water Pump: Inspect the pump for leaks or visible damage. If necessary, replace the pump following manufacturer guidelines.

Balance the Load: Always distribute clothes evenly in the drum to prevent imbalance. A well-balanced load ensures smoother spinning.

Professional Help:

If your troubleshooting efforts still need to resolve the problem, it's recommended to seek professional assistance. Trained technicians can diagnose complex issues and perform repairs with precision, ensuring the long-term functionality of your washer.

In Conclusion, A washing machine that's not spinning or draining is a hassle, but armed with the proper knowledge, you can address these issues effectively. By following our step-by-step troubleshooting guide, you'll be well on your way to restoring your washer's spin and drainage functions and regaining control over your laundry routine. Remember, safety always comes first – disconnect the appliance from power and water sources before attempting any repairs, and when in doubt, don't hesitate to reach out to professionals.